Categories
Best sellers
$899.00 USD
$899.00 USD
$1,199.00 USD
Sidebar
Ask a Question
Feuling Parts Race Series® Oil System Kit for M8 Engines – Oil Cooled Part #7097
Regular price $1,229.95 USD
Race Series® Oil System Kit - Oil Cooled - M8 The Feuling Parts Race Series® Oil System Kit for M8 engines (Part...
Lease for as low as $/week
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Category:
Race Series® Oil System Kit - Oil Cooled - M8
The Feuling Parts Race Series® Oil System Kit for M8 engines (Part #7097) offers a high-performance upgrade designed to optimize engine lubrication and cooling. Featuring a billet 7075 aluminum high-flow camplate, this kit improves oil flow and volume by enlarging the oil pump reservoirs and critical passages. The camplate's precise matching of oil portholes to the engine case ensures maximum oil delivery to lifters, piston cooling jets, crankshaft, and rod bearings, promoting consistent and reliable lubrication under demanding conditions. Each FUELING® oil pump is bench tested, with the relief valve seated and sealed to operate at a minimum of 30 psi, with full pop-off at 55-60 psi, ensuring stable pressure throughout operation. The combination of larger gears and properly sized passages significantly increases oil volume and pressure, effectively eliminating common pressure drops and scavenging issues associated with factory systems. The kit's oil pumps feature a machined groove on the back cover to accept the factory crank bearing seal, simplifying installation. By increasing oil pressure and flow, engine temperatures run 15°-25°F cooler, and oil temperatures decrease by 15°-30°F, resulting in improved engine longevity and performance. The M-Eight Water-Cooled™ pump provides 30% more pressure gear volume and 53% more scavenge gear volume over stock, while the M-Eight Oil-Cooled™ pump offers 27% increases in both pressure and scavenge volume. This kit helps eliminate wet sumping, blow-by, and oily air cleaner issues, contributing to cleaner operation and reduced maintenance. Test results demonstrate a 2 horsepower and 2 ft./lb. torque gain at the rear wheel, underscoring the performance benefits. Included components comprise a Race Series® oil pump, full-travel or short-travel hydraulic roller lifters, high-flow camplate, cam installation kit, cam bearing, bolts, washers, and assembly lube, all designed for precise fit and durability. Made in the USA, this kit is a comprehensive upgrade for serious riders seeking improved engine cooling, pressure stability, and overall performance for M8 Harley-Davidson engines.
Features:
- Billet 7075 aluminum high-flow camplate: 50% harder and stronger than factory, improves oil flow and volume
- Enhanced oil passages: enlarges reservoirs and matches portholes to engine case for maximum lubrication
- Bench tested oil pumps: relief valve sealed for a minimum of 30 psi and pop-off at 55-60 psi, ensuring stable pressure
- Increased oil volume and pressure: larger gears and passages provide 42% more scavenge volume and 68% more oil to bearings
- Temperature reduction: engine and oil temperatures run 15°-25°F and 15°-30°F cooler respectively
- Higher pressure gear volume: M-Eight Water-Cooled™ offers 30% more pressure and 53% more scavenge volume; M-Eight Oil-Cooled™ offers 27% increases
- Eliminates wet sumping, blow-by, and oily air cleaner issues for cleaner operation
- Performance gains: approximately 2 horsepower and 2 ft./lb. of torque at the rear wheel
- Comprehensive installation kit: includes oil pump, hydraulic lifters, camplate, bolts, washers, and assembly lube
- Made in the USA: built for durability, precise tolerances, and reliable performance
Related Products
