YOUR HELMET DESERVES BETTER THAN THE FLOOR!

Park Your Bike. Hang Your Gear. Grab a Cold One!

You've spent good money on your helmet, jacket, and riding gear. So why is your helmet sitting on the kitchen counter, your jacket thrown over a chair, and your keys playing hide-and-seek every time you're ready to ride?

Give your gear its very own parking spot!

Introducing the 3-in-1 Motorcycle Helmet Wall Mount — a custom 3D-printed storage solution designed to keep your riding essentials organized, displayed, and ready for your next adventure.

Whether you're building the ultimate biker garage, upgrading your man cave, or just trying to keep your better half from complaining about your gear everywhere, we've got you covered!

🔥 ONE MOUNT. THREE JOBS. ZERO EXCUSES.

🏍️ A VIP Parking Spot for Your Helmet

Stop balancing your helmet on handlebars, shelves, or countertops. Our wall mount features a wide, rounded helmet support that gives your favorite lid a dedicated place to rest.

🧥 Keep Your Riding Gear Together

Convenient lower-hanging points provide space for a lightweight riding jacket, vest, or other compatible gear. Keep everything together so you're ready when the road starts calling.

🔑 Never Play Hide-and-Seek With Your Keys Again

Hang your motorcycle keys and small accessories in one convenient location. Because nothing ruins a perfect riding day faster than spending 20 minutes looking for your keys!

🎨 YOUR RIDE. YOUR COLORS. YOUR STYLE.

Why settle for boring when you can make it yours?

Choose from available primary and accent colors to create a combination that complements your motorcycle, helmet, garage, or personality.

Classic black and red? Absolutely.

Black and orange? You bet.

Something bright and wild? Let's see what you've got!

Your motorcycle has personality. Your helmet holder should too!

CUSTOM 3D-PRINTED BY TEAM DREAM RIDES

We're not just another company selling generic motorcycle accessories.

We print these helmet holders ourselves using genuine Bambu Lab PLA filament.

Each holder is produced using modern 3D-printing technology, giving it a distinctive layered finish and allowing us to offer creative color combinations.

What Makes Ours Special?

✔ Printed by Team Dream Rides – We handle the 3D-printing process ourselves.

✔ Genuine Bambu Lab PLA Filament – We use consistent, name-brand printing materials.

✔ Custom Color Combinations – Personalize the look to complement your riding setup.

✔ Space-Saving Design – Get your gear off the counter and onto the wall.

✔ Multi-Purpose Storage – Convenient storage for your helmet, keys, and compatible hanging gear.

✔ Distinctive Biker Styling – Looks right at home in your garage, shop, entryway, or man cave.

✔ Made for Motorcycle Enthusiasts – A practical accessory for riders who appreciate a little extra style.

🎁 THE PERFECT GIFT FOR THE BIKER WHO HAS EVERYTHING!

Know someone who already owns enough motorcycle T-shirts, chrome accessories, and helmets to open their own dealership?

Here's something they'll actually use!

Perfect for birthdays, Father's Day, Christmas, garage makeovers, or simply treating yourself.

🏁 GIVE YOUR GEAR THE HOME IT DESERVES!

Your bike has a parking spot. Your helmet should have one too!

Choose your colors, get organized, and make your garage look as good as your ride!

INSTALLATION & MOUNTING INFORMATION

IMPORTANT: Mounting screws, anchors, and other installation hardware are NOT included.

Because every mounting surface is different, we leave the hardware selection up to you!

Whether you're installing your helmet holder on wood studs, concrete, brick, or another suitable surface, you'll need to select mounting hardware specifically rated for your wall type and the total weight of your gear.

For a safe and secure installation:

• Mount directly into a wall stud or suitable structural backing whenever possible.

• Use properly sized screws and anchors appropriate for your mounting surface.

• Do not install directly into unsupported drywall.

• Use hand tools only when tightening screws.

• Do not overtighten, as excessive pressure may crack or damage the 3D-printed bracket.

• Do not use adhesive strips or double-sided tape as a substitute for mechanical fasteners.

• Inspect the mount regularly for cracks, damage, or loose hardware.

• Never exceed the product's published weight capacity, if one is provided.

⚠️ IMPORTANT SAFETY NOTICE

This product is manufactured using Bambu Lab PLA filament and is intended for indoor use in temperature-controlled environments.

Excessive heat, direct sunlight, improper installation, overloading, or misuse may cause the product to deform, crack, or fail.

The purchaser is responsible for selecting appropriate mounting hardware and ensuring proper installation.

To the fullest extent permitted by applicable law, Team Dream Rides is not responsible for damage or injury resulting from improper installation, misuse, overloading, unauthorized modifications, or failure to follow the provided instructions. This statement does not limit rights or liabilities that cannot legally be excluded.

Helmet, jacket, keys, and mounting hardware are not included.

IMPORTANT SAFETY, USE & LIABILITY DISCLAIMER

PLEASE READ BEFORE INSTALLATION AND USE.

By purchasing and using this product, the customer acknowledges the following product limitations and safety instructions, subject to applicable law.

1. Intended Use

This product is intended for indoor storage and display of compatible motorcycle helmets and lightweight riding accessories. It is not intended for climbing, supporting people, supporting heavy equipment, or any other purpose outside its intended function.

2. Installation Responsibility

The purchaser or installer is responsible for selecting appropriate mounting hardware, evaluating the mounting surface, and ensuring the product is securely installed.

Improper installation, inadequate wall support, incorrect fasteners, or overtightening may result in product failure, falling objects, property damage, or personal injury.

3. Weight and Load Limitations

Do not overload the mount. The amount of weight it can safely support depends on the product's construction, installation method, mounting surface, and environmental conditions.

Do not hang on, pull on, swing from, or apply sudden or excessive force to the mount.

4. Temperature and Environmental Limitations

This product is manufactured using PLA filament, which may soften, warp, or lose structural integrity when exposed to excessive heat.

Use indoors in a temperature-controlled environment. Do not install in direct sunlight, near heaters, or in areas subject to high temperatures.

5. Inspection and Maintenance

Inspect the mount regularly for cracks, deformation, loose fasteners, or other signs of damage.

Immediately discontinue use if damage or instability is detected. Do not attempt to repair a damaged mount using adhesives or other temporary methods.

6. Helmet and Equipment Protection

The customer is responsible for confirming that the mount is compatible with their helmet and other equipment.

Helmet manufacturers may have specific storage recommendations. Follow the helmet manufacturer's instructions and avoid placing pressure on sensitive components, liners, visors, or accessories.

Team Dream Rides does not guarantee compatibility with every helmet model or configuration.

7. Product Variations

Due to the nature of 3D printing, minor cosmetic variations, layer lines, surface textures, and slight color differences may occur. These are normal characteristics of the manufacturing process and do not necessarily indicate a defect.

8. Limitation of Liability

To the fullest extent permitted by applicable law, Team Dream Rides disclaims liability for losses, injuries, or damage arising from misuse, improper installation, unauthorized modifications, overloading, failure to follow instructions, or use outside the product's stated environmental limitations.

Nothing in this disclaimer excludes or limits liability that cannot lawfully be excluded, including applicable consumer rights, product liability obligations, or liability arising from defective manufacturing or negligence where such exclusions are prohibited.

9. Customer Acknowledgment

Customers should review these instructions and warnings before installation and use. Use of the product should occur only after confirming that the mounting surface, installation hardware, and intended load are appropriate.

SAFETY FIRST. RIDE SAFE. STORE SMART.

Team Dream Rides