Categories
Best sellers
$899.00 USD
$899.00 USD
$1,199.00 USD
Sidebar
Fitment:
2015-2020 ROAD GLIDES
VERY IMPORTANT: Cable and wiring extensions will be needed for this size.
Coating: POWDERCOAT BLACK
Features of your 16" Westcoast-Mxtbars RG15
Fitment:
2015-2020 ROAD GLIDES
VERY IMPORTANT: Cable and wiring extensions will be needed for this size.
Coating: POWDERCOAT BLACK
Top Crossbar:
- 5 1/2" spread in the middle of the handlebar. Then bends and rises up 2" and then the 1-1/4" tubing is swaged (tapered) down to 1"diameter. (Fits conventional controls)
- Both sides have 1/2" holes punched for internal wiring.
- Cross width is 31 1/2" across and pullback is 3 1/2".
- Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake
- The (2) - 3/4" holes in middle of the bar are made to be centered for the 3 1/2 spacing of the risers.
The throttle side tubing at 1" is honed out and notched for fly by wire.
Risers: 3 1/2" spacing between risers. (Fits conventional top triple tree clamps). 1/2" x 5/8" oval holes are 1 7/8" up from the bottom for internal wiring.
Recommendations:
- Heavy Duty Bushings FOR ROAD GLIDE
- Grade 8 bolts
Keynote:
- These Handlebars are measured by overall height 14 inch risers with the 2 inch rise on the top cross bar equals 16 inches.
- 4 total weld points
- 2 holes will need to be made in the nacelle plastic to pass through and bolt down directly to the triple trees.
- On road glides the nipple on the underside of the vibration dampener on the inside part of the controls must be cut off to fit on our bars.
Related Products
